Hummer 2006 H3 - Manual (Page 139)

To enable automatic lighting, do any of the following:
• Turn the headlamp control from AUTO to off
and release the control. It will return back to
the AUTO position by itself.
• Turn the headlamp control from the parking lamp
position to AUTO.
• Turn the headlamp control from the headlamp
position to AUTO.
To disable automatic lighting, do any of the following:
• Turn the headlamp control from AUTO to off
and release the control. It will return back to
the AUTO position by itself.
• Turn the headlamp control from AUTO to the
parking lamp position.
• Turn the headlamp control from AUTO to the
headlamp position.
See Automatic Headlamp System on page 3-16 for
more information.
Vehicles first sold in Canada with an automatic
transmission cannot turn off automatic headlamps
unless the gear position is in PARK (P) and the
headlamp switch is turned to the Off position. Vehicles
first sold in Canada with a manual transmission can
turn off the automatic headlamps with the headlamp
control; however, the parking lamps will remain on.
; (Parking Lamps): Turn the knob to this position to
turn on the parking lamps, together with the following:
• Sidemarker Lamps
• Taillamps
• License Plate Lamps
• Instrument Panel Lights
2 (Headlamps): Turn the knob to this position to turn
on the headlamps, together with the previously listed
lamps and lights.
You can switch your headlamps from low to high beam
by pushing the turn signal/multifunction lever toward
the instrument panel.
Headlamps on Reminder
A headlamp reminder chime will sound if the following
conditions are met:
• The driver door is open.
• Parking lamps or headlamps are manually turned on.
• The key is either not in the ignition switch, or it is in
the LOCK position of the ignition switch.
The headlamp reminder cannot be turned off if the
conditions listed above are met.
In the automatic mode, the headlamps turn off once
the ignition is in ACC.
3-15