Maintenance when trailer towing, Trailer wiring harness – Hummer 2006 H3 User Manual

Page 269

Advertising
background image

When You Are Ready to Leave After
Parking on a Hill

1. Apply your regular brakes and hold the pedal

down while you:

start your engine,

shift into a gear, and

release the parking brake.

2. Let up on the brake pedal.

3. Drive slowly until the trailer is clear of the chocks.

4. Stop and have someone pick up and store

the chocks.

Maintenance When Trailer Towing

Your vehicle will need service more often when you’re
pulling a trailer. See the Maintenance Schedule for more
on this. Things that are especially important in trailer
operation are automatic transmission fluid, engine
oil, axle lubricant, belts, cooling system and brake
system. Each of these is covered in this manual, and
the Index will help you find them quickly. If you’re
trailering, it’s a good idea to review these sections
before you start your trip.

Check periodically to see that all hitch nuts and bolts
are tight.

Trailer Wiring Harness

Light-Duty Trailer Wiring Package

If your vehicle is not equipped with a trailer towing
package, the chassis harness will contain the following
blunt cut circuits:

Yellow: Left Stop/Turn Signal

Dark Green: Right Stop/Turn Signal

White: Ground

Brown: Tail Lamps

If you want to add on a trailer tow, it should be installed
by your dealer or a qualified service center. Also, see
Add-On Electrical Equipment on page 5-93 for more
information.

4-67

Advertising