Engine coolant, Engine coolant -24, When to check and what to use – Hummer 2006 H3 User Manual

Page 296: How to check and add fluid

Advertising
background image

When to Check and What to Use

Refer to the Maintenance Schedule to determine how
often you should check the fluid level in your clutch
master cylinder reservoir and for the proper fluid. See
Recommended Fluids and Lubricants on page 6-12.

How to Check and Add Fluid

The proper fluid should be added if the level does not
reach the bottom of the diaphragm when it is in place in
the reservoir. See the instructions on the reservoir cap.

Engine Coolant

The cooling system in your vehicle is filled with
DEX-COOL

®

engine coolant. This coolant is designed

to remain in your vehicle for five years or 150,000 miles
(240 000 km), whichever occurs first, if you add only
DEX-COOL

®

extended life coolant.

The following explains your cooling system and how
to add coolant when it is low. If you have a problem
with engine overheating, see Engine Overheating
on page 5-27.

A 50/50 mixture of clean, drinkable water and
DEX-COOL

®

coolant will:

Give freezing protection down to

34°F (

37°C).

Give boiling protection up to 265°F (129°C).

Protect against rust and corrosion.

Help keep the proper engine temperature.

Let the warning lights and gages work as they
should.

Notice: Using coolant other than DEX-COOL

®

may

cause premature engine, heater core, or radiator
corrosion. In addition, the engine coolant may
require changing sooner, at the first maintenance
service after each 30,000 miles (50 000 km) or
24 months, whichever occurs first. Any repairs
would not be covered by your warranty. Always use
DEX-COOL

®

(silicate-free) coolant in your vehicle.

5-24

Advertising