Hummer 2006 H3 - Manual (Page 345)

Removing the Spare Tire and Tools
The equipment you will need is located in the
swing-gate, behind a cover. To remove the equipment,
do the following:
1. Open the swing-gate. See Swing-gate on page 2-9
for more information.
2. Remove the cover, located on the inside of the
swing-gate, by lifting the two latches.
3. Turn the wing nut counterclockwise to release the
jack tool bag and jack.
4. Remove the tool bag and jack from its compartment.
5. Undo the straps that secure the jack tool bag to
the jack.
6. Open the tool bag and you will find the following
tools, which you will use to remove the spare tire
and flat tire:
A. Wheel Wrench
B. Jack Handle
Extensions
C. Jack Handle
D. Jack
E. Wheel Blocks
5-73