Harman Stove Company HB 38 DV - Manual (Page 18)

18
INSTALLATION
Only For Qualified Installers
Sealing Angle
Mounting Holes
Mounting The Victorian Face
1. Place fiberglass rope in sealing angle with angle
mounting bolts loose.
2. Place the face on the fireplace starting at the
bottom.
3. Slide the face into place and install the four
bolts as shown at left.
4. Slide the sealing angle against the fireplace and
tighten the mounting bolts.
Note: The face will have a one inch space under it
for hearth material. This must be considered
when planning the installation.
Complete Face Mounted