Introduction – Harman Stove Company HB 38 DV User Manual

Page 4

Advertising
background image

4

Introduction

The Harman Serenity III Direct Vent Gas Fire-

place is a listed gas-fired direct vent room fireplace tested
by Intertek Testing Services/Warnock Hersey to ANSI
Z21.88-2002/ CSA2.33-M02. CAN-CGA-2.17-
M91.

The installation of the Serenity III Direct Vent Gas

Fireplace must conform with local codes, or in the ab-
sence of local codes, with National Fuel Gas Code,
ANSI Z223.1 — latest edition and CAN 1 B1-149.1
and .2 Installation Code.

Also for use in mobile (manufactured) homes after

home is sited.

Mobile (manufactured) home installations must

adhere to current editions of Title 24 CFR, part 3280,
or CSA Z240.4.

CAUTION: This appliance must be vented to the

outside.

Installation and repair of the Serenity III Direct Vent

Gas Fireplace should be done by a qualified service per-
son. The appliance should be inspected before use and
at least annually by a qualified service person. More fre-
quent cleaning may be required due to excessive lint from
carpeting, bedding material, etc. It is imperative that
control compartments, burners, and circulating air pas-

sageways

of the Serenity III be kept clean.

When operating your Harman Serenity III Gas Fire-

place, respect basic safety standards. Read these in-
structions carefully before you attempt to operate the
fireplace. Failure to do so may result in damage to prop-
erty or personal injury and may void the product war-
ranty.

Consult with your local building code agency and

insurance representative before you begin your installa-
tion to ensure compliance with local codes, including the
need for permits and follow-up inspections.

Several issues must be addressed when selecting a

suitable location for your Serenity III Gas Fireplace. Ob-
serving required clearances to combustible materials, the
proximity to a safe chimney or venting system location,
and the accessibility of the gas and electrical supply must
all be considered. In addition, selecting a location that
takes advantage of the building's natural air flow is also
desirable to maximize the heating effectiveness of the
fireplace. In many cases, this is a central location within
the building.

Due to high temperatures , the Serenity III
Direct Vent Gas Fireplace should be located out
of traffic and away from furniture and draperies.

Children and adults should be alerted to the
hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition.

Young children should be carefully supervised
when they are in the same room as the appliance.

Clothing or other flammable materials should
not be placed on or near the appliance.
Surveiller les enfants. Garder les vetements,
les meubles , les s ence ou autres liquides a
vapeur inflammables lin de lappareil.

This appliance may be installed in an aftermar-

ket permanently located (mobile) home, where not
prohibited by local codes.

This appliance is only for use with the type(s)

of gas indicated on the rating plate. This appliance is
not convertible for use with other gases, unless a
certified kit is used.

Cet appareil peut etre installe dans un maison

prefabriquee (mobile) deja installee a demeure si les
reglements locaux le permettent.

Cet appareil doit etre utilise uniquement avec

les types de gas indiques sur la plaque signaletique.
Ne pas l utiliser avec d autres gas sauf si un kitde
conversion dertifie est installe.

Any safety screen or guard removed for servicing
an appliance must be replaced prior to operating
the appliance.

Advertising