Hughes Direcway DW6000 - Manual (Page 125)

Appendix B • Installing the indoor equipment using dial-up commissioning
1033295-0001 Revision 2
91
7. Use the Elevation, Azimuth and Polarization values to adjust
the antenna to achieve maximum receive signal strength.
8. Select the ACP (auto cross-pol) checkbox. If it is not
available, wait five minutes; the system will update.
9. Select Next to go to the Antenna Pointing - Transmitter
screen. See Figure 80.
Figure 79: Antenna Pointing - Satellite Parameters
Figure 80: Start manual cross-pol; pass and peak isolation