Installer console installation method, Caution – Hughes Direcway DW6000 User Manual

Page 132

Advertising
background image

Appendix C • Installing the DW6000 using Installer Console

98

1033295-0001 Revision 2

Installer console installation

method

Follow the steps below and refer to the illustrations on page 99
through page 101 to install the DW6000.

In addition, confirm that TCP/IP is enabled to accept IP addresses
automatically on your installer laptop PC. See Appendix D – on
page 121
.

CAUTION

Do not connect the power supply to the DW6000, or connect
the power supply to a power source, before instructed to do
so.

CAUTION

• Do not block any ventilation openings. Do not install near

any heat sources such as radiators, heat registers,
ovens, stoves, or other apparatus (including amplifiers)
that produce heat.

• Recommended ventilation space around the top and

sides of the DW6000 assembly should be approximately 6
inches. Ventilation is necessary to avoid overheating.

Advertising