Cannot surf but can access control center, Check that the unit is commissioned, Dw6000 leds – Hughes Direcway DW6000 User Manual

Page 82

Advertising
background image

Chapter 4 • DW6000 LEDs and troubleshooting

58

1033295-0001 Revision 2

Cannot surf but can
access Control Center

If you cannot surf the Internet but can access the Control Center,
follow the troubleshooting procedures below. Remember that any
problem may be caused by more than one thing. If you implement
a troubleshooting procedure but still cannot surf, proceed to the
next step. Also, try the troubleshooting procedures more than
once before contacting installer support.

Remember: if you cannot access the Control Center by clicking
on the shortcut or typing www.direcwaysupport.com in the URL
address or location bar, try typing

http://192.168.0.1

in the

bar and pressing Enter.

Check that the unit is

commissioned

1. At the Control Center, click on the

System Info

indicator.

The System Info screen appears. See Figure 55.

2. In the

DW6000 Information

box, check the Site ID line.

If the numerical site ID appears, the unit is commissioned.
Proceed to the next troubleshooting step.
If

Not Commissioned

appears, the DW6000 is not

commissioned. Contact installer support.

Figure 55: System Info indicator screen

Advertising