Honeywell 9900 - Manual (Page 150)

9 - 12 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
Backup Radio Settings
When the terminal’s radios are configured, entries are made in the registry that contain those settings.
However, those entries are removed during the next cold boot. Backup Radio Settings exports those radio
settings into a RadioSettings.reg file and places it in the
\IPSM\AutoInstall folder. By default, the
settings in the RadioSettings.reg file will be added to the registry during the next cold boot and your radios
will be configured automatically when the boot process is complete.
On the Network Utilities main window, tap the Backup Radio Settings icon . The RadioSettings.reg
file is created and placed in the \IPSM\AutoInstall folder.
Restore Radio Settings
You have a number of options to restore the registry by loading the RadioSettings.reg file.
Restore Radio Settings
On the Network Utilities window, tap the Restore Radio Settings icon . A message appears
asking if you want to load the RadioSettings.reg file. Tap Yes and RegEdit imports the radio registry
entries to the current registry.
Tap on the REG File:
Tapping on a REG file in any folder immediately tries to add the information in that file to the registry. A
message appears asking if you want to add the information to the registry. Tap Yes to add the information.
Cold Boot
Because this REG file is stored in the \IPSM\AutoInstall folder, AutoInstall will launch and install this
REG file during the next cold boot.