Honeywell 9900 - Manual (Page 56)

3 - 2 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
DeviceConfig.exm Sections and Keys
The sections and keys in the DeviceConfig.exm file are locked, which means that you can change values
but not names or descriptions.
Connections Section
The Connections section contains child sections that set communication parameters on the terminal.
Beam Section
The Beam section enables and disables the IrDA port.
Radio Manager Section
In the Radio Manager, typically, you would enable the radio in the WiFi section, enable DHCP in the
TCPIP section, then configure the radio settings in the Security\Supplicant\ProfileX or
Security\NonSupplicant section.
Section Name Description See Page
Connections Configures communication parameters. There are child sections
that configure the IrDA port, the on-board radios, and the
ActiveSync connection. 3-2
System Configures basic system settings. 3-9
Applications Configures software applications. 3-10
WiFi Section
The keys in the WiFi section control the settings of the WLAN radio.
Key Description Default
Value Available Values
Enable Enables and disables the WLAN radio. 1 0=Disabled
1=Enabled; if enabled, the GSM radio
section is disabled automatically
PowerMode Specifies the power save mode. 1 1=Disable; radio is powered
constantly (power save mode is
not used)
2=Always Enable; power save mode
is used
3=Auto Enable; EPSParm key
defines radio vs. battery
performance
EPSParm When PowerMode is set to 3 (Auto
Enable), this parameter specifies radio
vs. battery performance. N/A X=A value between 1 and 10, where:
1=Best Radio Performance
(Minimum)
10=Best Battery Life (Maximum)