Honeywell 9900 - Manual (Page 57)

Dolphin® Power Tools User’s Guide Rev A
8/6/08
3 - 3
DriverName Specifies the name of the radio driver.
This string must match the name of the
driver for the current device. N/A X=A value in the drop-down list; radio
driver names are terminal-specific.
Different Dolphins have different
radio drivers.
TCPIP Section
The keys in the TCPIP section determine how the radio handles IP addresses.
Key Description Default
Value Available Values
DHCP Enables and disables DHCP (Dynamic
Host Configuration Protocol). 1 0=Disabled; the static IP address in
the IPAddress key is used for the
radio interface.
1=Enabled; the IP address for the
radio interface is requested from a
DHCP server.
The remaining keys need to be set when DHCP is disabled. When DHCP is enabled, these numbers are
dynamically requested from a DHCP server.
IPAddress Static IP address for the radio
interface. N/A Static IP address
SubnetMask SubNet mask for the static IP address. N/A Subnet mask address
DefaultGateway Default gateway for the static IP
address. N/A Gateway address
DNS Domain name server for the static IP
address. N/A Domain name server address
Domain Domain name for the terminal N/A Terminal’s domain name
WINS Windows name server. N/A Windows name server address
WiFi Section
The keys in the WiFi section control the settings of the WLAN radio.
Key Description Default
Value Available Values