Honeywell 9900 - Manual (Page 77)

Dolphin® Power Tools User’s Guide Rev A
8/6/08
4 - 9
AutoInstall.exm
The AutoInstall.exm file controls the behavior and appearance of the AutoInstall window and install
process.
Key Function Default
Value Available Values
Version This is the current version of the AutoInstall.exm
file. This key is read-only and cannot be modified. 3 N/A
Debug Enable and disables logging of debug information
to
\IPSM\AUTOINSTALL.LOG .
0 0=Disabled
1=Enabled
Cancel Enable and disables the Cancel button on the
AutoInstall window. 0 0=Disabled
1=Enabled
FullScreen Determines if the AutoInstall window runs in full
screen mode (barring access to other windows). 1 0=Disabled
1=Enabled
2=Autoselects based
on the operating
platform.
HaltOnError Sets the behavior of AutoInstall when an error is
encountered. 1 0=Log the error and
continue AutoInstall
1=Halt AutoInstall and
prompt the user to
continue or cancel
MaskPassword If a password is entered in the Password key, this
key determines if that password is masked when
entered on the screen. 1 0=Disabled
1=Enabled
AutoInstall
window