Honeywell 9900 - Manual (Page 89)

Dolphin® Power Tools User’s Guide Rev A
8/6/08
5 - 11
Centering Section
The Centering section determines the centering window for bar code scanning.
ScanWedge Entry Description Default
Value Available Values
CenteringEnable= Enable and disables the decode
centering window for the decoder. 0 0=Disabled; centering is
disabled for ScanWedge.
1=Enabled; bar codes are
decoded only if they are
within the centering window
specified by the rest of the
keys in this section.
CenteringTop= Specifies the top coordinate of the
centering window. 210 Enter the coordinates in pixels.
CenteringBottom= Specifies the bottom coordinate of
the centering window. 270
CenteringLeft= Specifies the left coordinate of the
centering window. 346
CenteringRight= Specifies the right coordinate of
the centering window. 406