Honeywell 9900 - Manual (Page 92)

5 - 14 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
Note: xx and ss stand for hex values of a character (00-FF), nn for a numeric count (00-99).
ED Check to make sure there is a non-numeric ASCII character at the current cursor
position. If character is numeric, format is aborted.
FBnnxxyy…zz Suppress all occurrences of up to 15 different characters, starting at the current cursor
position, as the cursor is advanced by other commands. When the FC command is
encountered, the suppress function is terminated. The cursor is not moved by the FB
command. nn is a count of the number of suppressed characters in the list and xxyy…zz
is the list of characters to be suppressed.
FC Disables suppress filter and clear all suppressed characters.
E4nnxx1xx2yy1
yy2…zz1zz2 Replaces up to 15 characters in the data string with user specified characters.
Replacement continues until the E5 command is encountered. nn is the total count of
both characters to be replaced plus replacement characters; xx1 defines characters to
be replaced and xx2 defines replacement characters, continuing through zz1 and zz2.
E5 Terminates character replacement.
Code ID
Symbology Name Code ID
Australian Post A (0x41)
Aztec Code z (0x7A)
Aztec Mesa Code Z (0x5A)
British Post B (0x42)
Canadian Post C (0x43)
China Post Q (0x51)
Codabar a (0x61)
Codablock F q (0x71)
Code 11 h (0x68)
Code 128 j (0x6A)
Code 16K o (0x6F)
Code 32 Pharmaceutical (PARAF) < (0x3C)
Available Data Formatting Commands
These are the data formatting operations applied to the bar code data. The entire command string is
entered into the Format key.
Command Description