Honeywell HCE 60 - Manual (Page 19)

Configuration and electrical connection
17
Use only cables with wire diameters up to 1.5 mm 2 . We rec-
ommend the cable type JE-Y(St)Y 2 Ч2Ч0.8. Use the accom-
panying connector types and cables of sufficient length.
1. Connector (1 to 12)
2. Connections for expan-
sion module HCS 60
3. Antenna connector
4. Connector of actuator for
zones 1 through 8
In general, each zone can control up to 3 actuators. 3 actuators can
be connected for zone 1 and one each for zones 2 through 5. One
connection for the expansion module is available for each of the
zones 6 through 8.
The prefabricated cable of the thermal actuators can be
extended from 1 to 3 meters. This cable is available plug-in-
ready as type HCV 2.