Honeywell HCE 60 - Manual (Page 44)

Assigning zones and issuing room names
42
Checking assignment of room names
► Change setpoint temperature at Hometronic Manager (see instruc-
tions of Hometronic Manager)
LEDs 1 through 8 of the assigned zone flash up to three times.
The assignment is correct.
The storey controller exits the device display after approx. 60 seconds
and returns to normal mode.
Displaying faults
If the LED illuminates, a fault is present in at least one tempera-
ture zone.
► Press Fault button .
The LED flashes red. The storey controller switches to the
fault display.