Honeywell HCE 60 - Manual (Page 6)

Overview
4
Installation procedure
Classifying zones and actuators
• Determine which heating circuits* are controlled by the storey
controller.
Installation
• Install Hometronic components.
Configuration and electrical connection
• Set the storey controller to the actuator type, attach cables to the
respective connections and connect components together.
Start-up
• Assign setpoint adjusters and any room temperature sensors to the
temperature zones.
• Assign room names at the Hometronic Manager if necessary.
• Assign the time program of the wireless setpoint adjuster HCU 30
to the temperature zones if necessary.