Honeywell HCE 60 - Manual (Page 7)

Creating a zoning plan
5
Creating a zoning plan
A temperature zone is an area of the building, e.g. a room, in which
the setpoint temperature* is set with a setpoint adjuster. The storey
controller controls all thermal actuators of a temperature zone identi-
cally.
5 temperature zones can be set up for each storey controller. The
expansion module HCS 60 increases the number of temperature
zones for each storey controller to 8. A maximum of 3 actuators can
be connected in each zone.
Thus the total number of actuators which can be controlled by one
storey controller is limited to 24.
Determining temperature zones
Caution
Damage caused by equipment from other manufac-
turers!
The storey controller was designed for use with com-
ponents from Honeywell only!
► Use only H 200 BG (closed without current) or H 200 BO (open
without current)-type actuators.
► Group actuators (by type and location) which are managed by the
storey controller.
► Group together all actuators which are controlled by a setpoint ad-
juster in a temperature zone.