Figure 1 kit #02121nos wet kit components, Chapter 2 kit installation, 1 bottle mounting instructions – Holley 02121NOS User Manual
Page 7: 1 street vehicles, 2 racing vehicles
Figure 1 Kit #02121NOS Wet Kit Components
Chapter 2 Kit Installation
2.1 Bottle Mounting Instructions
NOTE: Disconnect the battery ground before beginning installation.
2.1.1 Street Vehicles
Accurate calibration of your NOS nitrous system depends on the bottle remaining at a stable temperature. Mount the bottle
away from heat sources, such as the engine compartment or exhaust system, and away from windows, where the bottle is
exposed to direct sunlight.
2.1.2 Racing Vehicles
Before mounting a nitrous bottle in a racing vehicle intended for use in sanctioned events, check with the sanctioning
association for any rules regarding this subject. Most associations require that the bottle be mounted within the confines of the
safety roll cage with the safety pressure relief cap vented away from the driver’s compartment.
7