HP 8GB - Manual (Page 37)

Technical Information 37
G:\TW\Lori\Raptor\C4388-90100\exraptor1.fm Page 37
Last Modified: Tuesday, January 27, 1998 8:33 pm
Printing date: Saturday, April 04, 1998
Colorado Backup for Windows 95 Requirements
Installing Colorado Backup for Windows 95 requires:
n Windows 95
n 8 MB of RAM
n 20 MB of available hard drive space (15 MB for the software and an additional
5 MB of space for operations overhead). To check available hard drive space,
double-click on My computer; click on the icon representing the hard drive on
which the backup software will be installed; open the File menu and select
Properties. Available hard drive space must be at least 20 MB.
Windows NT 4.0
You can use the Windows NT Backup applet with this tape drive.
LAN Installation
When using Colorado Backup on a LAN, the tape drive hardware and software must
be installed in a workstation. Do not install them on the network server. For other
LAN installation options, call the Cheyenne Customer Support phone number listed
on page 46.
NOTE: Do not use Colorado Backup for Windows 95 to backup Novell servers.
Colorado Backup for DOS can backup Novell 2.x and 3.x servers or Colorado
Backup for Windows (3.1 or 3.11) can backup Novell 3.x servers.
NOTE: Colorado Backup for Windows 95 can back up computers over your Windows
95 and Windows for Workgroups networks. However, Colorado Backup for Windows
95 will only back up the Windows 95 registry of the computer to which your tape
drive is attached. The Windows 95 registry of a remote computer will not be backed
up.