Appendix b programming features, Appendix b, Review all items running a program displaying data – Hach 900 MAX User Manual

Page 115: Review all items, Running a program, Displaying data

Advertising
background image

Page 113

8990apdx_pfeatures.fm

Programming Features

Appendix B

Programming Features

Review All Items

This function reviews all information in the Setup and Option menus without
worrying about accidentally changing the information. Use this function to
verify that the program is set up properly.

All program entries and the status of all logged channels are displayed. Since
this information fills more than one screen, scroll through the setup
information one page at a time with the arrow keys.

When you get to the last screen an

UP

key will be displayed. Scroll back up

the list or press

MAIN MENU

to exit.

When you are satisfied that all program entries are set up properly, press

MAIN MENU

to exit this screen and return to the main menu.

Review All Items Screen Contents
The first line of the Setup Review screen shows the software revision level for
the internal embedded software (firmware) of the sampler and should be
noted before calling the factory.

Running a Program

Note: When selecting Start from
Beginning, all logged data will be
cleared from memory. If this data
needs to be saved make sure it is
downloaded to a DTU or personal
computer prior to pressing

START

FROM BEGINNING.

To run or halt a program, press the

RUN/STOP

key on the front panel. If the

program has been stopped (and no changes to the program settings were
made while it was stopped), pressing the

RUN

key will cause the program to

ask to resume the previously running program (and retain all logged data) or

START FROM BEGINNING

(and clear all logged data).

Displaying Data

The Display Data function provides the recorded data for any channel being
logged in a tabular report or a graph.

In addition, for tabular reports, the data can be viewed from the beginning,
from the end, or from a specific point in time. A graph can display any 24-hour
period, zoom in to any portion of the 24-hour period for finer detail, or center
the graph on a specific point in time.

11:00 AM 21 - APR - 01

SETUP REVIEW

900 MAX VERSION:

1.00

NUMBER OF BOTTLES:

4

BOTTLE VOLUME:

10.00 gal

INTAKE TUBE LENGTH

50 ft

INTAKE TUBE TYPE

3

/

8”

VINYL

PROGRAM LOCK

OFF

11:00 AM 21 - APR - 01

SETUP REVIEW

CHANNEL 3

ppm

NOT LOGGED

1min

CHANNEL 4

ppm

NOT LOGGED

1min

CHANNEL 5

ppm

NOT LOGGED

1min

CHANNEL 6

ppm

NOT LOGGED

1min

CHANNEL 7

ppm

NOT LOGGED

1min

MEMORY MODE

WRAP

Advertising