HONDA FL5540K0 - Manual (Page 21)

FRONT LOADER ASSEMBLY
HY
1.
2.
FRONT LOADER ASSEMBLY
'DRAULIC PUMP MOUNTING
Pump mounting plate and pump drive joint
are installed on pump. Ensure bolts and
set screw are tight.
Attach the pump brackets to the pump
mounting plate using two each inch
bolts and
5/16"
flatwashers. The right
bracket is shorter than the left. Do not
tighten the bolts at this time.
Apply a light coating of grease to tractor
front PTO at this time.
Mount hydraulic pump to tractor by sliding
splined pump drive joint onto front PTO
shaft with mounting brackets inside main
frame and attaching with four
inch
bolts and lockwashers. Tighten all
pump mounting bolts.
NOTE: The masts and main frame come
.assembled. All cylinders and hoses 'have
been attached to the frame except the two
hoses from the hydraulic pump.
3. Set the loader on its stands and move the
tractor centrally between the masts.
PUMP
MOUNTING
PLATE
LEFT BRACKET
RIGHT BRACKET
LOADER INSTALLATION
19