Motion search, Figure 4-18, Motion search screen – Honeywell HRXD9 User Manual
Page 115
Operation
Document 900.0856
Rev 3.00
115
11/07
e.
Highlighting + and pressing
allows you to add a new search parameter.
Set up the desired search parameter. Refer to
for more information on setting up search parameters. The
column can be used to delete a single search parameter or all of the search
parameters.
f.
Highlight Case Sensitive and press
. This will toggle between On and Off.
When this feature is On, the search will find only those text strings in which
the case matches.
g.
Highlight Load and press
to load saved search option settings. Select the
desired search option setting.
h.
Highlight Save and press
to save the current search option settings. Use
the virtual keyboard that appears to enter the search option name.
5.
Once you set your desired search conditions, highlight Search and press
to
display the search results in the Text-In Search screen. Selecting Cancel exits the
screen without saving the changes.
Motion Search
Figure 4-18
Motion Search Screen
1.
The Motion Search… can be selected from the Search menu while the DVR
displays the camera full screen. The Motion Search screen displays a list of
motion events.
2.
Use the arrow buttons to highlight the event for which you would like to see video
and press
to display the video associated with the selected event on the small
search screen.
3.
Highlighting Close and pressing
will extract the video associated with the
Motion event and display the first image of the event.
4.
Pressing PLAY/PAUSE will start playing the event video segment. Pressing
SEARCH returns to live monitoring.
5.
You can also narrow your event search by selecting Option… and setting up a
new search condition.