Honeywell HRXD9 - Manual (Page 131)

WebGuard
Document 900.0856 Rev 3.00 131
11/07
D
WebGuard
WebGuard allows you to access a remote DVR, monitor live video images and search
recorded video using Internet Explorer web browser anytime from virtually anywhere.
Computer system requirements for using the WebGuard program are:
• Operating System: Microsoft® Windows® 2000, Microsoft Windows XP or
Microsoft Windows Vista
• CPU: Intel Pentium III (Celeron) 600MHz or faster
• RAM: 128MB or higher
• VGA: 8MB or higher (1024 x 768, 24bpp or higher)
• Internet Explorer: Version 6.0 or later
1. Start Internet Explorer on your local PC. You can run the WebGuard program by
entering the following information in the address field:
Http://IP address:port number. The DVR IP address and the WebGuard port
number set in the Network setup screen (WebGuard tab).
OR
Http://DVRNS server address/DVR name. The DVRNS server address and the
DVR name registered on the DVRNS server.
Note You will need to get the appropriate IP address for the DVR you
want to connect to and the WebGuard port number from your
network administrator.
Note WebGuard only works with Microsoft Internet Explorer and will
NOT work with Netscape.