Connecting the power cord, Figure 2-17, Power cord connector – Honeywell HRXD9 User Manual

Page 31

Advertising
background image

Installation

Document 900.0856

Rev 3.00

31

11/07

Connecting the Power Cord

Figure 2-17

Power Cord Connector

Connect the AC power cord to the DVR and then to a wall outlet.

WARNING!

ROUTE POWER CORDS SO THAT THEY ARE NOT A
TRIPPING HAZARD. MAKE CERTAIN THE POWER CORD
WILL NOT BE PINCHED OR ABRADED BY FURNITURE.
DO NOT INSTALL POWER CORDS UNDER RUGS OR
CARPET.
THE POWER CORD HAS A GROUNDING PIN. IF YOUR
POWER OUTLET DOES NOT HAVE A GROUNDING PIN
RECEPTACLE, DO NOT MODIFY THE PLUG.
DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO
MANY DEVICES IN TO ONE CIRCUIT.

Your DVR is now ready to operate. Refer to

Chapter 3, Configuration

and

Chapter 4,

Operation

to use the DVR.

Advertising