Honeywell HRXD9 - Manual (Page 48)

Configuration
48
Note Temperature and S.M.A.R.T. information will be available only
for IDE hard disk drives supporting the SMART (Self-Monitoring
Analysis and Reporting Technology) monitoring program.
7. Selecting Close and pressing exits the screen.
User Setup Screen
1. Highlight User in the System menu and press . The User setup screen
( Figure 3-18 ) displays the authorized groups and users. You can add and delete
groups and users. When adding a group, you can assign authority levels to the
group.
Figure 3-18 User Setup Screen
2. The +/- column is used to collapse and expand user groups. If there is a + or - in
this column, it indicates the item is a Group Name. If there is a - in front of the
Group Name, it indicates that the group has been expanded and all of the User
Names within that group are displayed below the Group Name. If there is a + in
front of the Group Name, it indicates that the group has been collapsed and all of
the User Names within that group are hidden. To collapse or expand a group,
highlight the +/- column in front of the desired group and press
.
3. Highlighting a Group Name and pressing allows you to change the authority
levels assigned to the group.
Caution Write down the new password and save it in a secure place. If the
password is forgotten, the unit must be reset using the Factory
Reset button and all data settings will be lost.