Figure 3-26, Port numbers setup screen – Honeywell HRXD9 User Manual
Page 54
Configuration
54
Figure 3-26
Port Numbers Setup Screen
d.
Change the numbers by highlighting them and using the Up and Down arrow
buttons to increase or decrease the number.
The factory default Port settings are:
Remote Admin:
8200
Remote Callback:
8201
Remote Watch:
8016
Remote Search:
10019
Note
The system restarts automatically after changing the port
settings.
Note
Do NOT use the same port number for two different programs,
otherwise, the DVR cannot be connected with the PC running
RAS or WebGuard.
Caution
When changing the port settings, you must change the port
settings on the PC running RAS or WebGuard as well. Refer to the
RAS Plus User Manual
for details.
4.
Selecting DHCP from the Type and highlighting Save reads the current IP
address of the DVR configured by DHCP (Dynamic Host Configuration Protocol)
network.