Notification setup, Figure 3-31, Webguard setup screen – Honeywell HRXD9 User Manual
Page 59: Figure 3-32, Notification mail setup screen
Configuration
Document 900.0856
Rev 3.00
59
11/07
Figure 3-31
WebGuard Setup Screen
2.
Highlight Use WebGuard Service and press
to toggle between On and Off.
See
for detailed descriptions of the WebGuard service.
3.
Highlight the box beside Port and press
. Set the port number used when
accessing WebGuard by using the Up and Down arrow buttons to increase or
decrease the numbers.
4.
You can save your Network changes by highlighting Save and pressing
.
Selecting Cancel exits the screen without saving the changes.
Notification Setup
The DVR can be set up to send an e-mail or to contact a computer running RAS
(Remote Administration System) when an event occurs.
1.
Highlight Notification in the Network menu and press
. The Notification
screen (
) displays. You will be able to change the Mail and Callback
settings.
Figure 3-32
Notification Mail Setup Screen
2.
Highlight Enable and press
to toggle between On and Off. You will only be
able to change the settings if Mail is enabled.