Honeywell HRXD9 - Manual (Page 70)

Configuration
70
4. Highlight the box beside Remote Control Product and select the device from the
list.
5. You can save your Remote Control settings by highlighting Save and pressing
. Selecting Cancel exits the screen without saving the changes.
Recording Settings
Your DVR offers a variety of flexible recording modes. You can set it up to record all the
time or to only record events. It can be set up to continue recording once the hard disk
drive is full by recording over the oldest video, or you can set it up to alert you when the
hard disk is full and stop recording.
Figure 3-48 Record Menu
Record Screen
1. Highlight Record in the Record menu and press . The Record setup screen
( Figure 3-49 ) appears.
Figure 3-49 Record Setup Screen