Archive screen, Figure 3-53, Archive setup screen – Honeywell HRXD9 User Manual

Page 74

Advertising
background image

Configuration

74

When the DVR is in the Event Record mode it is possible to have it record images
before the event occurs. The Pre-Event screen allows you to define how to handle
pre-event recording.

2.

You can turn individual cameras On or Off for pre-event recording. The image
speed can be set from 0.10 to 30.00 ips (25.00 ips PAL), and image quality can be
selectable from Very High, High, Standard and Low.

3.

You can set the amount of time to record prior to the event by adjusting the Dwell.
You can set the Dwell from 5 seconds to 30 minutes. The longer the dwell set, the
fewer maximum ips can be set.

Note

When the DVR is in the Time or Time & Event mode, it ignores
the pre-event settings and follows the time settings.

4.

You can save your changes by highlighting Save and pressing

. Selecting

Cancel exits the screen without saving the changes.

Archive Screen

1.

Highlight Archive in the Record menu and press

, and the Archive setup

screen (

Figure 3-53

) appears.

Figure 3-53

Archive Setup Screen

2.

Highlight Archive On and press

to toggle between On and Off.

Note

If you have not set up a storage device for archiving, a message
appears notifying you of this.

3.

Select the Days and Time Range you want archived.

Advertising