Honeywell HRXD9 - Manual (Page 79)

Configuration
Document 900.0856 Rev 3.00 79
11/07
3. Highlighting the box under the Sensitivity heading and pressing allows you
to adjust the DVR’s sensitivity to motion for Daytime and Nighttime independently.
There are five settings with 1 being the least sensitive and 5 being the most
sensitive.
Figure 3-60 Motion Detection Sensitivity Screen
4. You can adjust the minimum number of detection blocks that must be activated to
trigger a motion alarm. Highlighting the box under the Min. Blocks heading and
pressing
allows you to adjust the minimum number of detection blocks for
Daytime and Nighttime independently. Smaller numbers provide greater
sensitivity because fewer detection blocks must be activated.
Figure 3-61 Motion Detection Min. Blocks Screen
5. Turning Zone View On will allow you to observe how the DVR is reacting to
motion. When in the motion viewing mode, the detection zone of video will be
displayed in green. Any detected motion within the zone will be displayed in red.
6. You can define the area of the image where you want to detect motion; for
example, a doorway. Highlight the box under the Zone heading, and press
.
The Motion Detection Zone screen ( Figure 3-62 ) displays.
Figure 3-62 Motion Detection Zone Screen
The Motion Detection Zone screen is laid over the video for the selected camera.
You can set up motion detection zones by selecting or clearing blocks.