Honeywell HRXD9 - Manual (Page 85)

Configuration
Document 900.0856 Rev 3.00 85
11/07
8. Highlight the box under the Spot Monitor heading and press . A list of SPOT
monitors and cameras appears. Each SPOT monitor can be associated with a
camera. The DVR will display the associated camera on the SPOT monitor
whenever it detects video loss on the selected camera.
9. You can save your Video Loss changes by highlighting Save and pressing .
Selecting Cancel exits the screen without saving the changes.
Text-In Screen
1. Highlight Text-In in the Event menu and press . The Text-In setup screen
( Figure 3-70 ) appears.
Figure 3-70 Text-In Settings Screen
The DVR can be setup to react to text input from devices such as ATMs
(Automated Teller Machines) and POS (Point of Sale; as in cash registers). This
screen allows you to configure the DVR for each text-in device.
2. Highlight the box under the Setup heading, and press . Selecting the Setup
heading changes all the parameters excluding Port settings of all the text input
channels.
Note The system performance might be affected when a large
quantity of text inputs are detected from several channels at the
same time.
Note VP Filter, Generic Text and EPSON-POS devices are currently
supported.