Honeywell CT3697 - Manual (Page 18)

69-1642 18
Change Temperature Setting Indefinitely (Hold)
❑ Move the System switch to the desired position (Heat or Cool).
❑ Press then or to change your setting if desired. (The display changes from showing the setpoint
temperature to room temperature after approximately three seconds).
❑ To cancel “Hold” press .
Change the Temperature Setting Until a Designated Day and Period (Vacation Hold)
❑ Press twice.
❑ Press or until the display shows the desired temperature setpoint.
❑ Press Time until the desired number of days that you will be away (1 through 255) is displayed.
❑ Press , , or to select the program period when you want the program to restart.
NOTE: If the Vacation Hold needs to be cancelled before the designated time, press to return to the
program.
Daylight Savings Time Key
This feature allows you to switch between standard time and daylight savings time.
❑ Press during fall to set the time back one hour.
❑ Press during the spring to set time forward one hour. DST is displayed when operating on daylight savings
time.
NOTE: Pressing the Daylight Time key more than once in a five minute period scrolls you through various time
options. For example, one hour earlier or later, with or without DST. Pressing Daylight Time six times in a
five minute period returns you to your original setting.
Hold Temp
Run
Program
Hold Temp
Wake Leave Return Sleep
Run
Program
Daylight
Time
Daylight
Time