Usage key, Step 12. set the fan and system switches – Honeywell CT3697 User Manual
Page 19
19
69-1642
Usage Key
❑
Press
once to display the hours and minutes that the heating or cooling system has been operating for the
current day.
❑
Press
a second time to display the system operating time for the previous day (midnight to midnight).
❑
Press
a third time to display the system operating time since the last time the usage function was cleared.
NOTE:
Press
for three seconds to clear the usage function.
STEP 12. SET THE FAN AND SYSTEM SWITCHES
First set the fan switch.
Fan On: The fan runs continuously. Use for improved air
circulation or for more efficient central air cleaning. (In a
heat-only system, fan runs continuously only if fan relay is
connected to the G thermostat terminal).
Fan Auto: Normal setting for most homes. The equipment
controls the fan operation.
Then set the system
switch.
Heat: The thermostat controls your heating system.
Off: Both the heating and air conditioning systems are off.
Cool: The thermostat controls your air conditioning system.
Usage
Usage
Usage
Usage
Fan
On Auto
Fan
On Auto
System
Heat Off Cool
System
Heat Off Cool
System
Heat Off Cool