Hearth and Home Technologies Heat Recovery Ventilator HRV200PLUS User Manual

Installation & operating instructions, Hrv200plus, Heat recovery ventilator

Advertising
background image

02/04

4034-102 Rev F

1

CAUTION:

Do not expose the appliance to the elements (such

as rain, etc.).

IMPORTANT!

Before installation, the installer must give careful consider-

ation to how this HRV200PLUS system will operate if con-

nected to any other piece of mechanical air movement equip-

ment, i.e. a forced air furnace or air handler, operating at a

higher or lower static pressure.
Before the installation, the installer must assess any inter-

action between the HRV200PLUS and vented combustion

equipment, i.e. gas furnaces, oil furnaces, wood stoves, etc.,

and ensure the ability of the vented appliances to properly

vent is not compromised by the operation of the

HRV200PLUS system.
After installation, the installer must confirm the compatibil-

ity of the installed system by measuring both air flows of

the HRV200PLUS by using the balancing procedure found

in this manual and evaluating the effects on any intercon-

nected equipment.
NEVER install a ventilator in a situation where its normal

operation, lack of operation or partial failure may result in

the back drafting or improper functioning of vented com-

bustion equipment!!!

For assistance during installation contact your local dealer

or contact the Heatilator Technical Services Department,

Hearth & Home Technologies Inc., 1915 W. Saunders Street,

Mt. Pleasant, Iowa 52641, 1-877-IAQ-VENT

(1-877-427-8368).
HEATILATOR

®

is a registered trademark of Hearth & Home

Technologies Inc.

INSTALLATION & OPERATING

INSTRUCTIONS

PLEASE RETAIN THIS MANUAL

FOR FUTURE REFERENCE

This appliance is certified to CSA22.2 and UL1812 standards

and also is performance tested to CSA439-00.

HRV200PLUS

HEAT RECOVERY VENTILATOR

DESIGNED TO OPERATE WITH THE FOLLOWING FRESH AIR FIREPLACES:

HEATILATOR CNXT70IPLUS SERIES & NB4236IPLUS SERIES

HEAT-N-GLO 6000PLUS SERIES & 6100PLUS SERIES

Note:

The Caliber NXT Plus gas appliance (CNXT70IPLUS Series)

and the 6100 PLUS (6100PLUS Series) CANNOT be installed at an

elevation above 6,200 ft. (1,890m).

Note:

An arrow (Æ) found in the text signifies change in

content.

Ж

Ж

Ж

Advertising