Print from a bluetooth device – HP Photosmart A530 Series User Manual

Page 20

Advertising
background image

3. Make sure the USB configuration setting of the camera is set to Digital Camera, and

then connect the camera to the camera port of the printer using the USB cable that
came with the PictBridge-certified camera. The memory card/camera port light
flashes while the camera establishes a connection to the printer, and then remains
lit.
See the camera documentation for more information about the USB configuration
setting. The name of the setting and its options may differ on non-HP digital cameras.

4. If you already selected photos for printing on the camera, the Print DPOF Photos?

dialog box is displayed on the camera. Select No to bypass printing pre-selected
photos. DPOF (Digital Print Order Format) lets the user mark photos on a digital
camera for printing and include other image information, such as number of copies
to be printed.

5. Use the options and controls on your camera to print your photos. See the camera

documentation for more information. The memory card/camera port light flashes while
the photos are printing.

Important: Your photos are instantly dry, and can be handled immediately after they are
printed. However, HP recommends that you leave the printed surface of your photos
exposed to the air for 3 minutes after printing to allow the colors to fully develop before
you stack them with other photos or place them in albums.

Print from a Bluetooth device

This section describes how to print from any device with Bluetooth wireless technology,
a short-range communications technology that enables a wide range of devices to
connect with each other without the clutter of cables.
To use Bluetooth connectivity with the HP Photosmart A530 series printer, you must
purchase and connect the optional HP Bluetooth

®

wireless printer adapter to the camera

port on the front of the printer. To learn how to print from a Bluetooth device, see the
documentation that came with your Bluetooth adapter.

To print from a Bluetooth device
1.
Connect the Bluetooth adapter to the camera port on the printer.

Figure 4-1 Control panel

1 Bluetooth adapter

Chapter 4

18

Print without a computer

Advertising
This manual is related to the following products: