HP 1005 Series - Manual (Page 14)

12 Chapter 1 Getting started ENWW
Load the paper input tray
1 Slide the paper input tray in and down at an angle until it fits securely in the printer.
2 Slide the media guides out and back to accommodate the media.
3 Place the media in the paper input tray. Slide the media guides until they are flush with the
media.
4 Install the paper input tray cover.
Connect the power cord
Plug the power cord into the printer (A). Plug the power cord into the power receptacle (B).
1
2
3
4
3