HP 1005 Series - Manual (Page 43)

ENWW Finding the solution 41
Error messages on the screen
Error messages on the screen
Error message Solution
Printer not responding Check the following:
● The Ready light is on.
● The power cord and printer cable are correctly connected.
CAUTION
Before you connect the cable to the printer, always unplug the printer.
Otherwise, the printer might be damaged.
Cannot access port (in use by
another application) Try the following:
● Reboot the computer.
● Make sure that you are only running one software application at a time.
Illegal operation/General
protection fault/Spool 32 error A problem with your computer system resources (memory or hard disk)
occurred in Windows. To clear this error, restart the computer.
To help prevent this error from occurring in the future, use some or all of the
following recommendations:
● Run fewer applications at the same time. Close applications that you
are not using instead of minimizing them. Programs such as screen
savers, virus checkers, status software, fax/answering software, and
menu programs use the resources that the computer might need to
print.
● Avoid memory-intensive tasks such as sending a fax or running a video
clip while printing.
● Delete all temp (file_name.tmp) files from the Temp subdirectories,
such as C:\Windows\Temp.
● Print at a lower resolution.