Hayes Microcomputer Products ADSL Ethernet Modem - Manual (Page 13)

9
4 4 4 4 The Basic Setup page displays.
You need to fill in at least four of these boxes: Protocol, VPI,
VCI, and Encapsulation. If your service provider gave you
these settings, it will make installation a little faster and easier,
but don’t worry if you don’t have them. We’ll tell you how to
figure them out.
If Your Service Provider Gave You Protocol, VPI,
VCI, and Encapsulation Settings
1 1 1 1 If you have this information (Protocol, VPI, VCI, and
Encapsulation), select the correct Protocol from the list.
The screen may change slightly, depending on the protocol you
select.
2 2 2 2 Enter the VPI, VCI, and Encapsulation in the appropriate
boxes.
3 3 3 3 If you selected PPPoE as your Protocol, your provider may
also have given you a Service Name. If so, enter it in the
appropriate box. (This information is optional.)
4 4 4 4
If you selected PPPoE or PPPoA as your Protocol, your
provider should have given you a User ID or User Name
(usually your email address or the characters preceding the
@ sign in your email address) and a Password. (These are