Ip remap filter, 5 ip remap filter – Hayes Microcomputer Products ADSL Ethernet Modem User Manual

Page 52

Advertising
background image

48 Hayes ADSL Ethernet User’s Guide

can ping the web site (for example,

C:\WINDOWS>ping www.hayesmicro.com)

or use one of the free DNS resolvers available

over the Internet.

LAN IP

Address

If you specify a LAN address, it cannot receive

data from the specified WAN IP Address.

Protocol

If you select udp or tcp, you must specify a

port or a range of ports in the Ports field.
If you select all, the ADSL Ethernet matches
packets from both udp and tcp. The Ports field

is disabled.

Ports

You can specify a single port number (for

example, 80) or a range of port numbers

separated by colons (for example, 80:100).

3.5 IP Remap Filter

The IP Remap Filter page of your Configuration Manager

controls the Type of Service field in an IP packet header.

Generally, you use this page in conjunction with the Routing

Configuration page (see page 51), where you can specify a route

based on the Type of Service.

Make the following entries:

Enable

Enables or disables a Type of Service change.

Advertising