Hayes Microcomputer Products ADSL Ethernet Modem - Manual (Page 63)

59
Enable Turns the access profile on or off.
Network
Management
System Address
[/mask]
A LAN or WAN address that will be
allowed access.
The default is ″*″ (all addresses).
Management
Service
Cli-telnet (Command Line Interpreter via
Telnet), SNMP (Simple Network
Management Protocol), web (Web
interface), ftp (File Transfer Protocol, for
upload/download of files only), or all (the
default).
Access Point LAN, WAN, or both. By default, all
methods are enabled over the LAN and all
access is barred over the WAN.
Click Update, then Save Configuration.
When you have saved an entry, it is displayed under Active NMS
Entries at the bottom of the page in the Network Management
System Address column.
3.13 Connection Loopback
The Connection Loopback page of your your Configuration
Manager lets you test the quality of an ATM connection to the
modem.
When you place a specified connection into data loopback mode,
all data packets received on that connection will be 'looped back' to
the service provider for testing.