Connection guide, Connecting the monitor, Video inputs and looping outputs – Honeywell HRDP DVR User Manual

Page 26: Connecting to a network, Connecting audio

Advertising
background image

Installation

______________________________________________________________________________________________
26

Connection Guide

Connecting the Monitor

There are three available monitor outputs on the Performance Series DVR.
Composite Monitor output for CCTV monitor – BNC (Marked MAIN)
VGA output for VGA monitor – Mini-Sub D15
S-Video output - Mini-Din 4 (16 Channel only)

Video Inputs and Looping Outputs

The Performance Series DVR comes with up to 16 BNC video inputs on the
rear of its chassis. Each video input has a corresponding looping BNC output

beneath it for passing the video signal to another monitoring/recording device.

Connecting to a Network

Use the RJ45 jack or RS232 port, if using a serial modem, on the rear of the
DVR when connecting to a network.

Connecting Audio

To record audio on the DVR connect the audio source to the Audio In Port

(White) on the back of the chassis.
To listen to live or recorded audio connect the Audio Out Port (Red) to an
amplified speaker system.

Note

The DVR audio output is a line level source which requires an

amplified speaker system. The audio input can be from an amplified
source or directly from a microphone.

RJ45

RS232

Advertising