Disk configuration, Format – Honeywell HRDP DVR User Manual

Page 33

Advertising
background image

Performance Series DVR User Guide

______________________________________________________________________________________________
Document 800-02089 Rev E

33

10/08

Disk Configuration

Format

Shows installed Hard Disk Drives and the status of other attached storage
devices.

To format a Hard Drive use the arrow keys to select the appropriate device and

press ENTER. Select OK to confirm formatting and press ENTER.

To format a USB device use the arrow keys to select USB FORMAT and press
ENTER. Select the USB target and select FAT32. Press OK to format.

Tip

Refer to the list of Approved USB Flash Drives in the Introduction
chapter.

To refresh the list of connected USB devices select USB Reset and press
ENTER.

Caution All USB devices must be formatted as FAT32 before using with the

DVR.

Note

Upon formatting a drive, all video and other data stored on that drive
will be permanently erased and cannot be recovered.


DISK CONFIGURATION

FORMAT

SIZE

249GB
-
NONE
NONE

STATUS

REC
-
EMPTY
EMPTY

FORMAT

FORMAT

ERASE

FORMAT
FORMAT

TYPE

HDD1
CD-RW
HDD2
HDD3

FORMAT ALL USB FORMAT USB RESET

FORMAT

OVERWRITE

CHECK

SMART

SAVE

CANCEL

Advertising