Search methods, Express search, Event search – Honeywell HRDP DVR User Manual
Page 57: Daylight savings search
Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-02089 Rev E
57
10/08
Search Methods
Express Search
Users can select a specific date and time of recorded data to search.
1.
Select Express Search.
2.
Select a Date from the list and press ENTER.
3.
Define time by using the arrow buttons to move the bar across the grid
(Highlighted time blocks represent recorded data). Press ENTER to go
from the desired hour to the minutes selection.
4.
Select Play.
5.
Use the play controls on the front of the DVR or remote control to search
video.
Event Search
Define a search based on event recorded data.
1.
Select Event Search.
2.
Define the date and time to search.
3.
Define the type of event occurrences to include in search.
4.
Define cameras to include in search or select All cameras.
Daylight Savings Search
Daylight Savings Search is used to find recorded data after switching the time
at the end of Daylight Savings Period. The System will record data with the
same time stamp for two hours when they are repeated. If any overlapped time
data exists the system will display the times on this page.
PREV NEXT
NO.
13
12
11
10
9
8
7
6
5
4
DATE
2007 / 7 / 17
2007 / 7 / 16
2007 / 7 / 15
2007 / 7 / 14
2007 / 7 / 13
2007 / 7 / 12
2007 / 7 / 11
2007 / 7 / 10
2007 / 7 / 09
2007 / 7 / 08