Schedule setup, Audio setup, Motion / event input – Honeywell HRDP DVR User Manual

Page 76

Advertising
background image

Remote Software

______________________________________________________________________________________________
76

Schedule Setup

Night – Set night time (ex. If 18:00 to 6:00 is defined as night time, 6:00 to
18:00 is defined as day time)

Weekend –Define weekend days

Audio Setup

Specify volume level and audio settings for recording according to preset
schedules and live or playback mode.

Audio Day - Enable/Disable

Audio Night - Enable/Disable

Audio Weekend - Enable/Disable

Audio Live - Enable/Disable

Audio Playback - Enable/Disable

Volume – 0 ~14

Motion / Event Input

Motion / Event Setup allows you to enable recording or relay response on

Motion, Sensor Event, and Video Loss

Motion

Enable– On/Off [Enable Event Input]

Sensitivity – 1~5 [Define Motion sensitivity level. 1=least sensitive]

Area – Red=selected, White=clear. Click to select/clear boxes.[Create or clear

the motion area on the camera]

Sensor

Sensor – ON / OFF [Enable recording on sensor event.]

Sensor Detail – All / 1~16 / All Channel [Associate sensors with channels.
Select the All check box to associate all sensors used to activate recording for

that channel; Select the All Channel check box to associate the selected
sensors with all channels.]

Video Loss

VideoLoss – ON / OFF [Enable event on video loss.]

Video Loss Detail - All / 1~16 / All Channel [Associate video loss “V” alert with

specific viewed channels. Select the All check box to prompt all channels with
video loss to provide a “V” alert to the viewed channel; Select the All Channel
check box to associate the selected channels to report a “V” alert when video
loss occurs.]

Advertising