Hotpoint HDA330 - Manual (Page 4)

OPERATING INSTRUCTIONS
HDA100 Features and appearance may vary
OFF START
HEATED
DRY ON
HEATED
DRY OFF
HDA200 Features and appearance may vary
HEATED
DRY
ON
OFF
NORMAL
WASH
POTS &
PANS
PLATE WARMER
WATER
SAVER
RINSE & HOLD
OFF ON
(HEATED DRY ON)
(HEATED DRY OFF)
HDA300 and HDA330 Features and appearance may vary
HEATED
DRY
ON
OFF
NORMAL
WASH
POTS &
PANS
PLATE
WARMER
WATER SAVER
RINSE & HOLD
OFF ON
(HEATED DRY ON)
(HEATED DRY OFF)
WASH TEMP BOOST
ON OFF
HDA900 and HDA930 Features and appearance may vary
OFF
RINSE & HOLD (HEATED DRY OFF)
HOURS
DELAY
PLATE
WARMER
(HEATED DRY ON)
START
6
4
2 START DELAY
(HOURS)
LIGHT
WASH
WATER
SAVER
NORMAL
WASH
POTS &
PANS
HEATED
DRY
ENERGY
SAVER
HEATED
WASH
• Load dishware. (See Loading
section.)
• Make sure the Cycle Indicator Dial
is at the OFF position.
• Add detergent. (See Detergent
Dispensers and Detergent Guide
sections.)
• Check rinse agent level. (See
Rinse Agent section.)
NOTE: If dishwasher drains into a
garbage disposal, operate the disposal
until it is empty before starting the
dishwasher.
*If you want to use a cycle on the
Dial go to Using the Cycles on the
Dial section.
• Latch the door.
• Select your desired wash cycle and
energy saver options.
Select Cycle/Option
Before you Begin
Starting the Cycle
2
Turning the Cycle Indicator Dial to
START or ON will begin the cycle
immediately.
NOTE: To obtain the benefits of a
complete cycle, be careful that you
do not turn the Dial any farther than
is necessary to start the dishwasher.
There is a time delay between start-
up and water fill so you will not
hear any wash action right away.
3
1
2 3
2 2 3
HDA150 and HDA180 Features and appearance may vary
HEATED
DRY
ON
OFF
2 3
2 3
2 2 3
Find your model. Locate your
model number by looking on the
label fastened to the tub wall just
inside the dishwasher door.
Your dishwasher is designed to give
maximum performance on loads
with normal and heavy soils.
4