High Resolution Technologies Security Camera User Manual

High resolution, True day/night box camera, Name and function of parts

Advertising
background image

Name and Function of Parts

Top View

Side View

OSD Menu
Navigation
Pad

OSD Menu
Control
Key

SET

Control Key

Rear Panel Connections
(AC mains)

Rear Panel Connections
(AC/DC low voltage)

Important Notes

Safety Information

Installation and servicing must only be carried out
by qualified personnel.
To avoid risk of damage or electric shock, do not
attempt to service this product or open the chassis.
This product contains no user-serviceable parts.
Low voltage cameras must be powered from a UL
listed class 2 power supply.
For outdoor use, please employ an IP65 (or better)
certified protective housing.
Mains cameras are not evaluated by UL.

CAUTION: To prevent risk of fire or electric shock,
do not expose this product to rain or moisture.

This camera is designed for indoor general-purpose
CCTV applications only. Do not expose to extreme
conditions such as temperatures outside the range of
-10ºC~50ºC (14ºF~122ºF).

This camera must be used in a clean, dry, dust-free
environment unless enclosed in an IP65 (or better)
certified housing.

This product is intended for security and surveillance
CCTV applications. It must be installed and maintained
in accordance with good installation practices.

Electromagnetic Compatibility (EMC)

NOTE: This is a class B product. In a domestic
environment this product may cause radio interference.

The manufacturer declares that this product is compliant
with EMC directive 89/336, and Low Voltage Directive
LVD 73/23 EEC, conforming to the requirements of
standards EN 55022 for emissions, IEC801 parts 2, 3 and
4 for immunity, and EN 60065 for electrical equipment
safety.

Connecting to a Power Supply

Connecting

Mains Power Supply:

This camera operates directly

from the mains supply and is supplied with a detachable
power supply cord. The operating voltage is
100~250VAC

Low Voltage Power Supply:

This camera operates

between 11~28 VDC and 20-29VAC. Connections are
indicated above the terminals on the rear panel of the
camera. The power supply must be a UL listed class 2
type.

NOTE: The typical power consumption of a camera is
less than 5 Watts.

The power LED on the rear panel is lit when the camera
is connected to a power source.

Connecting to a TV / Video

Connect a video coaxial cable terminated with a 75 Ω
BNC connector to the BNC socket labeled VIDEO OUT.
Connect the other end of the cable to the VIDEO IN
socket of your video or television equipment.

R

L

VIDEO

R

L

VIDEO

Mounting Your Camera

Your camera can be mounted from the top or bottom,
either on a bracket or tripod. The mounting points accept
standard photographic mounting bolts (1/4" BSW or 20
UNC).

The mounting bracket must be capable of supporting
the camera and the lens.

Should the lens be substantially heavier than the camera,
it is recommended to use the mounting point on the lens
itself.

NOTE: Ensure the bracket anchors and mounting
surface can support the load of the camera and
bracket.

Installing Lenses

Before installing a lens, you must first remove the lens
cover from the camera. If mounting a C-Mount lens,
attach the spacer ring to the camera.

Installing Fixed and Manual Lenses

1. If using a C-mount lens, slide the back focus adjustment

fully to the left with the lens facing towards you (see
Setting the Focus).

2. Screw the lens on to the camera.
3. Ensure the electronic iris and automatic gain control are
both ON.
4. If the lens has an iris, open this fully.
5. If the lens has a focusing ring fitted, set it to infinity (∞)

and then adjust the back focus.

6. If the lens has an iris, close according to the required
depth of field.

Focus
Adjust

Lens
Mount

Bracket
Mount

Power
LED

Power
Socket

BNC Composite
Video Output

VIDEO

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DC LENS

NO

R.t

POWER

Ƃ

100 - 240VAC 50/60Hz

VIDEO LENS

CAUTION

- +

- +

AI Lens,
Lamp & Data
Connections

RS485
Switch

Power
Input
Terminal

DC Lens
Connector

VIDEO

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DC 12V
AC 21V

DC LENS

NO

R.t

POWER

GND

VIDEO LENS

CAUTION

- +

- +

Setting the Focus

To adjust the image focus, there is a back focus
adjustment mechanism located at the front of the camera,
above the lens. If a C-Mount lens is to be used on the
camera, the supplied adaptor ring should be mounted to
the camera first. Failure to do this may cause damage to
the IR Cut filter mechanism and CCD.
Use the following procedure to adjust the focus:

1. Unscrew (loosen) the back focus adjustment lock
screw.
2. Slide the focus adjustment to the left (if facing the lens)

to move the CCD sensor away from the back of the
lens or to the right to move the CCD sensor towards
the back of the lens.

3. Tighten the screw to lock the back focus adjustment in
place.

Lock Screw

This camera is the ideal solution for

security and surveillance needs. It provides

excellent quality even in low-light

conditions, features zone blocking to

safeguard your privacy, and remote control

via an RS485 port.

High Resolution

True Day/Night Box Camera

QUICK START GUIDE

RoHS

R

Advertising