Security codes & authority levels (cont’d) – Honeywell SYSTEM OVERVIEW N7003V3 User Manual

Page 18

Advertising
background image


– 18 –

Security Codes & Authority Levels (cont’d)

PART.2 - SHOP?

0 = NO , 1 = YES

The keypad now prompts for the user’s access to the
next partition (see GOTO command). Again press 0
or 1. If yes, the system will automatically assign a
user number for use in that partition and will
prompt for authority level and global arm options
for this user within the partition (see previous
steps).

PART. 1 A0* WHSE

USER 03 AUTH=3G.

When both partitions have been displayed, the
keypad will scroll through the partition(s) to which
access has been assigned, and will display the user
number, authority level and global arm option for
each. The “G” after the authority level indicates
that the global arm feature is active for this user in
the displayed partition. The "*" indicates the
partition from which this user can be changed or
deleted. The "." at the end of the second line
indicates that this user sends open/close reports.
Open/close reporting is automatically active for any
users added by you, if you have open/close reporting
active.

To Change a User’s Code

CODE

1. Enter Master or Manager code and press the 8 key + user number to

be changed.

2. Enter the new code for that user.

ADD NEW USER?

0 = NO , 1 = YES

The system will recognize that the user number is
already in use and will prompt whether or not this
is a new user. Enter 0 to change the existing
user's code to the code entered in step 3.

USER 02 CHANGED
SUCCESSFULLY

The system will confirm that the change is allowed
based on authorization level, and if so, will put the
new code into effect.
Note that if changing one’s own code, the
system will prompt for the new code to be re-
entered. This prevents accidentally changing one’s
own code.

Advertising