Quick guide to system functions – Honeywell SYSTEM OVERVIEW N7003V3 User Manual

Page 48

Advertising
background image


– 48 –

Quick Guide To System Functions

FUNCTION

PROCEDURE

COMMENTS

Check Zones

Press [

✱].

To view faulted zones when is system not ready

Display All

Descriptors

Press and hold [

✱] for 5 seconds.

Displays all alpha descriptors programmed by

installer.

Arm System

Enter code.
Press arming key desired (AWAY,

STAY, INSTANT, MAXIMUM).

Arms system in mode selected.

Disarm System

Enter code. Press OFF [1].

Disarms system and silences alarms.

Bypass Zones

Enter code. Press BYPASS [6].
Enter 2-digit zone number(s).

Bypassed zones are unprotected and will not

cause an alarm if violated.

Chime Mode

Enter code. Press CHIME [9].

Keypad will sound if doors or windows are

violated while system disarmed.

Test Mode

Enter code. Press TEST [5]

Activates alarm sounder and allows sensors to be

tested.

View Messages

Press and hold [0] for 5 seconds

Message from central station will appear.

View User

Capabilities

Enter user’s code. Press [

✱] + [✱]. Displays partitions & authority levels assigned to

the user.

GOTO Partition

Enter security code. Press [

✱].

Enter partition number (1-2).

Allows a user at one keypad to perform functions

in another partition, (user must be authorized).

Self-Help

Press and hold any function key for

at least 5 seconds.

Will display abbreviated instructions for the key

pressed.

Add a User

Enter master/manager code.
Press CODE [8].
Enter new user’s user number.
Enter code for that user.
Enter authority for that user in this

partition (1-5).

Follow prompts, 1=Yes, 0=No.

Master & Manager level users can add users to

the system, each with its own code and
authority level.

Change a

User’s Code

Enter master/manager code.
Press CODE [8].
Enter user’s 2-digit number.
Enter new code for that user.
Press 0 (No) at prompt.

Master & Manager level users can change their

own or other users’ codes.

Delete a User

Enter master/manager code.
Press CODE [8].
Enter user no. to be deleted.
Enter master/manager code.
Press 1 (Yes) at prompt.

Master & Manager level users can delete users.
A user can only be deleted by a user with higher

authority level.

Access Control

Enter security code. Enter 0.

Activate access relay for current partition.

Enter security code. Press [#]
Enter 71 or 72.

Activate output device as programmed.

Control Output

Device

Enter security code. Press [#]
Enter 70.

Activate output device manually

Advertising